Questions about
this product?
Name:
Phone:
Email:
Subject:
Message:

Tite-Loc Plus

Description



Tite-Loc Plus Panels combine structural panel performance with architectural panel aesthetics. Tite-Loc Plus Panels are corrective leveled to provide superior panel flatness. A factory-applied sealant bead is applied for additional weather resistance. Maximum panel length is 64 feet and minimum panel length is 4 feet. Consult factory for longer lengths.

Tite-Loc Plus Panels feature a 2%u201D leg height that requires mechanical field seaming to 180 degrees after installation. Panels have a concealed-fastener floating clip system designed to allow for thermal expansion/contraction. For further details, please contact PAC.

Trim

All flashing and trim will be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032-.063 gauge as specified) or PAC-CLAD steel (24 ga. or 22 ga. as specified). A 20 year, non-prorated finish warranty can be supplied covering finish performance.

Installation

Tite-Loc Plus Panels are intended for use in architectural and structural roofing. Substrates may include 5/8%u201D (min.) plywood, nailboard insulation or equal with an underlayment of ice and water shield or 30# (min.) roofing felt applied horizontally from eave to ridge. Other substrates may include metal decking, purlins or rigid insulation in conjunction with bearing plates.

A minimum 1/2:12 pitch is required. Contact Petersen for further detail assistance on projects. For Coastal applications, aluminum panels along with stainless steel clips must be used for warranty. Consult a local architect/engineer for compliance with local codes and conditions.

Tite-Loc Plus Panels

Tite-Loc Plus Panels are factory-formed to length and designed to be field-seamed to 180?. The panel combines an attractive thin-rib profile with superior structural performance. Tite-Loc Plus panels are designed for application over a wide variety of substrates in slopes as low as 1/2:12 pitch. Tite-Loc Plus panels are available in 12%u201D, 16%u201D and 18%u201D widths. Materials available include 22 and 24 gauge steel; .032 and .040 aluminum.

Tite-Loc Plus Seaming

The Tite Loc Plus seamer can only run in one direction. The Tite Loc Plus panels should be installed from left to right to ensure the seamer travels down slope. The seamer will not travel up slope on a roof pitch greater than 4:12.

Specifications


 

 

 SPECS:

12%u201D, 16%u201D or 18%u201D O.C.
2%u201D high

  • 20 year non-prorated finish warranty
  • Available with striations or striations
    with pencil ribs
  • Herr-Voss corrective leveled
  • Maximum panel length of 64 feet
  • Mechanically seamed in the field to 180 degrees

Colors

Kynar 500® Or Hylar 5000® pre-finished galvanized steel and aluminum
for roofing, curtainwall and storefront applications.

PAC-CLAD® Cool Colors  
PAC-CLAD® Metallic Colors

Stone White Bone White Slate Gray Musket Gray Hunter Green Evergreen Hartford Green Forest Green
Stone White Bone White Slate Gray Musket Gray Hunter Green Evergreen Hartford Green Forest Green
Almond Sandstone Granite Charcoal Patina Green Arcadia Green Hemlock Green Teal
Almond Sandstone Granite Charcoal Patina Green Arcadia Green Hemlock Green Teal
Sierra Tan Terra Cotta Colonial Red Cardinal Red Berkshire Blue Award Blue Interstate Blue Cityscape
Sierra Tan Terra Cotta Colonial Red Cardinal Red Berkshire Blue Award Blue Interstate Blue Cityscape
Medium Bronze Dark Bronze Burgundy Mansard Brown Slate Blue Military Blue Matte Black Midnight Bronze
Medium Bronze Dark Bronze Burgundy Mansard Brown Slate Blue Military Blue Matte Black Midnight Bronze
Zinc Silver Copper Penny Aged Copper Champagne Weathered Zinc    
Zinc Silver Copper Penny Aged Copper Champagne Weathered
     Zinc		    
Due to the limitations of the on-screen viewing, this color chart is not an accurate representation of our actual colors.
Color charts and sample chips are available on request at no charge.

Gallery